Ø 産品描述Description

Aust系列高溫粘結劑，主要以納米級二氧化矽膠體、高純高嶺土和膨脹劑按一定比例混合攪拌而成。

It is mainly made up of nano-scale silica colloid, high-purity kaolin and expansion agent mixed in a certain proportion.

本品打開包裝即可使用，無需添加任何添加劑。從常溫至高使用溫度之間的任何一個溫度區間的粘結強度均在2MPa以上，克服了大多數粘結劑在650℃～1000℃之間沒有粘結強度的缺點，同時還可以實現不同材料之間的粘結，具有很好的粘結效果。

This product can be used after opening directly without adding any additives. The bonding strength in any temperature range from normal temperature to the highest service temperature is above 2MPa, overcoming the defect that most adhesives have no bonding strength between 650 ℃ and 1000℃, and at the same time, bonding between different materials can be realized with good bonding effect.

Ø 性能指标Product data

Ø 産品特點

a) 耐火性能好；Better fireproof performance;

b) 粘結強度高；High bond strength;

c) 粘結穩定性好；Better stability;

d) 使用範圍廣；Using for wide range;

e) 不含自由水，灰縫薄；（傳統耐火泥鋪展到輕質磚上即失去流動性，因而灰縫較大。）Free of free water, thin ash seam;(traditional refractory loses fluidity when it spreads on light bricks, so the mortar joint is large)

f) 砌磚瞬間即可生産很好的吸附力。Bricklaying can produce good adsorption force instantly.

Ø 典型應用Application

主要用于各種高溫窯爐砌築中耐火材料的粘結砌築；尤其是在搶修時，代替傳統火泥優勢特别大。

It is mainly used for the bonding and masonry of refractory materials in various high-temperature kiln masonry; especially in the repair, it has a great advantage in replacing traditional fire mud.